LSH1-48

• Model: LSH1-48
• Standard platform size: 24" x 40"
• Oversized Platforms Available up to 36"W x 54"L
• Capacity: 1,000 lbs
• Lowered Height: 9.5"
• Raised height: 57.5"
• Electric Hydraulic Lift Table
• 115/1/60 Voltage Standard
• 1 HP Motor
• Hand Controls or Foot Controls: Please Specify when ordering

Standard Features Include:

• Heavy-Duty Torque Tubes
  Torque tubes minimize platform twisting and deflection for high degree of rigidity and stability.
• Comfort Edge Design
  No sharp corners on table top. Bright safety yellow stripe for high visibility.
• Contoured Legs
  With extra width at the pivot point, Southworth's contoured legs combine great strength with lower collapsed height.
• Lubricated-for-Life Bushings
  All pivot points have hardened pins that operate in lubricated-for-life, virtually maintenance free bushings.
• Adjustable Flow Control
  Pressure compensated flow control valve with lock out. Preset and locked at 10 F.P.M. maximum lowering speed per ANSI Standard, MH29 where applicable.
• Heavy-Duty Hoses
  All Southworth lifts have heavy-duty hoses with burst strength 600% greater than the hydraulic operating pressure.
• Oversize, Low-Pressure Hydraulic Cylinders
  Low operating pressure extends the life of hydraulic components. Chrome-plated piston rods are corrosion resistant, and cylinder walls are honed.
• Built In Safety Chock
  Prevents accidental lowering of table during maintenance.
• Tell-Tale Return Hydraulic Fluid Line
  Clear plastic return line from cylinder rod bearing to tank gives visual indication of need to repack cylinder and prevents fluid spillage in the event of a bypass.
• Wear Indicating Rollers and Roll Retainers
  Rollers are captured in the base by means of retainers to prevent accidental separation or misalignment. All oversized width tabletops also include an upper set of retainers.