KN4596

• 6" Height Adjustability.
• Full 1-3/4" Wide Nickel Plated Glides.
• 3/8" Threaded Shaft on Leveling Glides.
• No Crossthreaded Bolts.
• Heavy 5/16" Diameter Adjusting Bolts.

• 15 Amp rated
• 8 U-ground outlets
• Lighted switch & circuit breaker
• 10 Foot long cord
• UL Listed components
• Tubular steel enclosure

• Fully Slotted Top To Bottom.
• Heavy 2" Square Frame.
• Required For Adjustable Shelves, Bin Box Rails & Lights.
• Angle Adjustment System.
• 500# Capacity
• Snap-on accessories.
• No Tools Required.
• Level shelves and accessories without measuring.

• Fully Slotted Top To Bottom.
• Heavy 2" Square Frame.
• Required For Adjustable Shelves, Bin Box Rails & Lights.
• Angle Adjustment System.
• 500# Capacity
• Snap-on accessories.
• No Tools Required.
• Level shelves and accessories without measuring.

• Solid Heavy 18-Gauge Steel.
• Holes Spaced 1" Apart.
• Shipped Assembled, Ready to Attach.
• 14 Holes High.
• Custom Made to Fit Between Uprights.

• Heavy Duty Powder Coated Steel enclosure.
• HD Power Supply Mounted Below Work Surface. Bracket included.
• Creates Less Heat with less Consumption.
• Color: 5,000 Kelvin. Similar to Fluorescent Daylight.

• LED. Tested to Last More Than 25-years of average usage.
• Conveniently Located Lighted Switch.
• No Shattering Glass Tubes, mercury Hazard, or special disposal.
• No Dirty Black Blubs or shock hazard.
• White Frame. Other colors available

Length

• Reinforced Welded Design.
• Won't Twist Under Heaviest Loads.
• Powder Painted.
• Snap onto Uprights.

• Nylon Door Wheels.
• Sliding Doors.
• Both Doors Lock.
• Stainless Steel Handle

Length

• Reinforced Welded Design.
• Won't Twist Under Heaviest Loads.
• Powder Painted.
• Snap onto Uprights.

Size

• Strong 16 - Gauge Construction.
• All Factory Welded.
• Attaches To Uprights.

• Design Load 50 lbs.
• Genuine Unistrut Components.
• Ball bearing Axis.
• Powder Paint Finish.

• Adjusts Up/Down and Allows the Monitor to Tilt.
• Slides on the Support (Vertical or Horizontal).
• Ten Bronze Bushings for Stability and Durability.
• Heavy Welded Steel Construction.
• Dual Tilt Functionality.
• Frame Black Color.

Adjusts:

• Up & Down
• Side to side
• Back & forward
• Angle / tilt

• Supports 60Lbs
• Will Accomodate Vertical and Horizontal CPUs
• Vertical and Horizontal Nylon Support Straps.
• Mounts Anywhere on Bottom of Workbench.
• Holds CPUs up to 16" High.
• CPU Holders Fit Front to Back on all Benches Except 8' and 10' which Must be Mounted Right to Left.
• Frame Black Color.