HUE-04-90

ECOA Upender

• Model: HUE-40-90
• Capacity: 4,000 lbs
• Platform Size: (Platform A & B)
  • Width: 24"W up to 48"W
  • Length: 36"L up to 48" L
  • *Note: both platforms must have same width
• Lowered Height: 10"
• Single and Three Phase voltages available
• Standard hand controls

ECOA HUE Series Hydraulic Upenders are heavy-duty electro hydraulic tables with capacities of 2,000 to 10,000 lbs., angles of tilt to 90 degrees with platform sizes of 24" x 36" to 72" x 72".

Because they are autonomous products, HUE Series Hydraulic Upenders can be either mounted on scissor lifts or used as free-standing upenders

Call for custom units: 877-860-3620

• Internally-mounted 1.5HP, 230V, 1PH, 60Hz, or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor or 3HP, 208/230/460V, 3PH, 60Hz, continuous duty TENV motor (specify required voltage)
• 24V operating control voltage
• NEMA-4X constant-pressure (watertight, dust-tight and corrosion-resistant) "UP-DOWN" pushbutton box with 8 ft. straight cord
• NEMA-12 prewired controls (dust/ drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses
• Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles
• Limit switch and mechanical stops in both directions
• 10 ft. power cord (connector plug not included)
• Smooth steel tops with 3.75 in. straight safety toe guards with black and yellow safety stripes on toe guards
• Double acting hydraulic cylinders
• Surfaces degreased, oxide primed and finished with two coats of enamel
• Lifetime self-lubricating, anti-friction bearings at all pivot points
• Internal high-pressure gear pump with manifold-mounted check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters
• Includes hydraulic oil