HTTSS-02-45

• Capacity: 2,000 lbs
• Standard Platform Size: 36" x 48"
• Oversized platforms available up to: 60" x 72"
• Horizontal lowered height: 10"
• Single and three phase voltage available
• Standard hand controls

ECOA Space Saver Tilt Tables

ECOA HTTSS Series Scissor Tilt Tables are heavy-duty electro-hydraulic tables with capacities of 2,000 to 6,000 lbs., angles of tilt from 0 to 45 degrees, and platform sizes of 36" x 48" to 60" x 72".

The SpaceSaver tilts within its own base frame, allowing the tilt operation to work within a minimum of floor area for maximum efficiency.
The hydraulic system is powered up and down utilizing double acting cylinders.
The leg rollers are entrapped within the base frame to ensure maximum stability.
Because they are autonomous products, Hydraulic SpaceSaver Tilt Tables can be either mounted on scissor lifts or used as free-standing tilt tables

Internally-mounted .75 HP, 115/230V, 1PH, 60Hz, or 208/230/460V, 3PH, 60Hz intermittent duty TENV super torque motor. Specify voltage required. If 115V, 1PH, 60Hz voltage is required, a 20 amp circuit is necessary. 24V operating control voltage 24 V operating control voltage NEMA-4X constant-pressure (water-tight, dust-tight and corrosion-resistant) "UP-DOWN" Pushbutton box with 8 ft. straight cord NEMA-12 prewired controls (dust/drip-tight industrial type) with liquid-tight electrical connectors. Control box contains magnetic starter, control transformer, thermal overload and fuses Double-acting hydraulic cylinders Hard, chrome-plated, polished shafting, hydraulic cylinder piston rods and axles Surfaces degreased, oxide primed and finished with two coats of enamel Lifetime self-lubricating, antifriction bearings at all pivot points Internal high-pressure gear pump with check valve, relief valve, pressure-compensated flow control valve, solenoid valve, suction and return filters

Product Brochure

Call 877-860-3620 for Custom Applications