LPBL-30-2

Guardian Low Profile Lift Table

• Model: LPBL-30-2
• Capacity: 3,300 lbs
• Platform size: 39.5"W x 61"L
• Lowered height: 3-5/8"
• Raised height: 33-1/8"
• Lift speed: 25 second (approx)
• Remote power unit: 1 HP Motor
• 230/460/3/60 Voltage
• Standard hand controls

The floor mount power unit has the pump motor and tank on the plate frame. This is ideal for placing the power unit under a conveyor or work bench or when locations are required. Features 8' hoses, power cord and control cord. Three-button control box has 115 voltage single phase standard on 1,100 lb. and 2,200 lb. capacity units. 230/460 voltage three phase on 3,300 lb. units

• Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
• Single acting cylinders with drainage system and check valve to stop the lift from lowering in case of hose burst
• Safety clearance between scissors to prevent trapping during operations
• Removable lifting eye(s) to facilitate handling and installation of the lift table Bearings
• Extremely low collapsed heights of 2.9" to 4.3" provides access for rolling products, carts or pallet trucks
• Upper platform fitted with safety perimeter which prevents descent on contact with obstructions
• External power unit equipped with a relief valve against overloading and a compensated flow valve for controlling lowering speed. Supplied with 8 ft. long hoses
• 115 voltage single phase standard on 1,100 lb and 2,200 lb capacity units
• 230/460 volt 3 phase standard on 3,300 lb units
• Mechanical blocks for safe maintenance operations
• Low tension (24v) control box with up-down buttons
• Self-lubricating bushings on pivot points
• Upper limit switch
• 1 HP Motor