Tilt-To-Load 460/3/60 Motor

Morse Tilt-To-Load Drum Tumbler

• Model: 310-3-460
• 2 HP 60 Hz TEFC Motor
• Voltage: 460V Three Phase
• Tumble drum 29" to 37" (74 to 94 cm) tall
• Tumble drum 18" to 23.5" (46 to 60 cm) in diameter
• Variable speed: 5 to 20 RPM
• Capacity:
  • 800 Lb. (363 kg) full drum
  • 400 Lb. (181 kg) half-full drum*
• Power Tilt
• Rotate closed plastic, steel, or fiber drum
• Thorough corner-over-corner mixing action
• Saves time, labor and money

Morse Tilt-To-Load Drum Tumblers

Morse Tilt-To-Load Drum Rotators have power-lift, and tumble drum "corner-over-corner" to thoroughly mix contents. The drum tumbler holds your drum on an angle to rotate drum with vigorous "corner-over-corner" action!

Options Available:

• Enclosure kits with safety interlock

Install all Morse Rotators in accordance with OSHA requirements for enclosure and safety interlock, etc. so the rotator automatically turns off when enclosure door is opened. One way to accomplish this is with a Morse enclosure with safety interlock.

For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.”

Power connections and motor controls must comply with applicable codes.

• Mixing in a Closed Drum Means Less Hazards
• Using a Morse Drum Rotator eliminates spills, splashing of dangerous contents on workers, and risk of contamination.
• Now you can get the benefits of mixing inside closed shipping drums and have the machine do the work of loading and unloading itself!
• Morse 310 Series models accept the drum upright at floor level.
• The user controls hydraulic tilting action that raises the drum into position for rotating.
• A second valve allows the operator to start and stop the hydraulic motor that drives rotation.
• You minimize time, labor and operating cost by eliminating extra moves required for getting drum into mixing position.
• Rotate various sized drums, weighing up to 800 Lb. (363 kg) at 5 to 20 RPM.

Tilt-To-Load Drum Tumblers

• Rotate your drum at: 5 to 20 RPM
• Capacity:
• 800 Lb. (363 kg) Full Drum
• 400 Lb. (181 kg) Half-Full Drum *
• Handle your drum:
• 29” to 37” (74 to 94 cm) tall
• 18” to 23.5” (46 to 60 cm) in diameter

• Product Brochure - Click Here

  Explosion Proof and custom units available

  For more information please call 877-860-3620