289F Fork Drum Racker

• Model: 289F
• Capacity: 800 lbs
• 2 Button pendant control
• On board 12V deep cycle battery and charge
• Self contained hydraulics
• 55 Gallon steel or plastic drums

With the safety conscious MORStak Forklift Mounted Drum Rackers, you can move drums on and off racks, pallets, trucks, etc. with your forklift. Lift an upright drum and place in horizontal position. Rack rimmed 55-gallon steel or plastic drums weighing up to 800 Lb. side by side with virtually zero clearance between them. Handle your drum with a drum faucet in place , allowing your drum rack to serve as a dispensing station.

• Eliminate "bare fork" drum handling
• Move drum on and off rack, pallet, truck, etc.
• Control drum tilt from your forklift with battery-powered tilt
• Securely clamp drum into holder
• Lift drum from upright or horizontal position
• Place drum upright or horizontally
• Rack your 55-gallon steel drum
• Rack your 55-gallon plastic drum with top rim when the included Drum Pads are installed. The Drum Pads are designed to support a flexible plastic drum.
  • Drum Pads are included with each Forklift Mounted Drum Racker
  • When the Drum Pads are installed, it reduces maximum drum cradle width from 19" (48.25 cm) to 13" (33 cm) for racking a 55-gallon drum

A 2-button pendant reaches back to the forklift operator to control drum tilting. Forklift mounted drum rackers feature battery powered tilt with self contained hydraulics. They have a positive drum gripping mechanism that must be manually engaged before lifting an upright drum or tilting a drum from horizontal position. MORStak TM drum rackers will not allow you to tilt your drum without the clamp engaged.

MORStak TM forklift mounted drum rackers have self contained 12 DC powered hydraulics. The 12V deep cycle battery and charger are included. No  connection to the hydraulics or power of your forklift is required.