185XGR

• Model: 185XGR
• Capacity: 2,500 lbs
• Lift, move, and pour a drum with your hoist or crane
• Rotate drum 360 deg. in either direction
• 3-Piece Drum Holder for 55 gallon ribbed steel drum
• Every Morse below hook drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Handler

Morse Super-Duty below-hook drum carrier enables drum pouring at or above your reach. You control drum tilting 360 in either direction. Dispense drum contents with your hoist or crane. Even lift and invert your drum with drum faucet in place.

This Super-Duty drum carrier has a pull chain to control the drum tilt with a 150:1 worm gear speed reducer and "Super-Duty" rating

The KEY FEATURE of Model 185XGR is its 3-Piece Drum Holder. This 8" (20.3 cm) wide metal band is hinged in two places and has a front closure to secure the drum. It replaces the cinch chain and ratchet tightner.

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. Lift drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' (3.66 meter) chain loop.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop Tilt-Brake (option # 3900i-P), braking is immediate and automatic.

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.