Currencies:  
877-860-3620
CALL TOLL FREE

185A-GR

Starting at:
Call for Price


Please Choose Options:

Tilt Brake






  • Model: 185A-GR
  • Manufactured by: Morse

Morse Kontrol Karrier
  • Model: 185A-GR
  • Capacity: 2,000 lbs
  • Lift, move, and pour a drum with your hoist or crane
  • Rotate drum 360 deg. in either direction
  • 2 Load binders for 55 gallon steel drum
  • Every Morse below hook drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Handler

Morse Extra Heavy-Duty below-hook drum carrier enables you to pour a drum above your reach. You control drum tilting 360 degrees in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place.

Model 185A-GR has two web straps and ratchets to secure drum in the drum holder.

This Extra Heavy-Duty drum carrier has a pull chain to control the drum tilt with a 60:1 enclosed worm gear speed reducer and "extra heavy-duty" rating.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.