85i-SS - Stainless Steel

• Model: 85i-SS
• Capacity: 800 lbs
• Type 304 stainless steel
• Built-in tilt lock
• Drum Rotation: 360 deg. in either direction
• 55 Gallon drums
• Accepts drum adaptors
• American National Standard ASME B30.20 and a load test certificate is shipped enclosed with each unit

Morse Below Hook Drum Karrier

Morse Below-Hook Drum Carriers enable you to move and pour a drum within your reach. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place.

You manually control drum tilting 360 in either direction. These drum carriers require that you manually grasp the drum to control the drum tilt. The drum carrier can be locked with drum in vertical position for transporting, or locked in the horizontal position to pour. Release tilt-locks on drum carrier for hand-controlled tilt at any angle.

Diameter Adaptors: Add the correct diameter adaptor for each smaller drum to handle multiple drum sizes with the same drum handler. Simply and quickly place into and remove from the drum holder. Adaptors for 17.5" diameter and smaller have adjustable hold down brackets for up to 38" tall drums.

Rim clamps and bracket assembly for plastic and fiber drums

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Call for more information: 877-860-3620