400A-60-114

Morse Hydra-Lift Drum Karrier

• Model: 400A-60-114
• Capacity: 800 lbs
• Pour height: 60"
• Straddle ID / OD: 37" / 44"
• Air powered drum lift and tilt control

Morse Hydra-Lift Drum Karriers

Safe drum dumping requires well-designed, ergonomic drum handling equipment to reduce risks of injury or property damage.

Morse Hydra-Lift Drum Karriers combine incredible strength with simple drum handling by one person. One person can safely and easily handle a heavy drum with a Morse Hydra-Lift Karrier. Adjust the drum tilt angle for controlled dispensing of the contents from your drum. Hydra-Lift Karrier's are available as a manual or DC operated units. AC or Air powered units available upon request.

• Welded frame.
• Maximum lift height is measured from floor to lowest point of a horizontal 55-gallon drum.
• Screw-type floor lock.
• Electric-powered, air-powered, and battery-powered models are available with either manual tilt control or as all-powered units with three separate handles that control drum lift, drum lower, and drum tilt.
• Handle drum with drum faucet or drum cone in place
• A selection of power options are available, call for information.
• Variable tilt angle, with 360° forward or reverse, lets you pour drum contents in a controlled manner.
• Adjustable-height drum dumper is easy to load, just move Karrier against drum and cinch saddle.
• Handles 800-lb. fully loaded or 500-lb. half-full drums.
• chain cinch drum saddle,
• The MORcinch drum holder adjusts for 22" to 23.5" diameter drums and accepts options for plastic or fiber drums. Diameter adaptors for smaller drums are available.
• 8" polyolefin wheels and 4" swivel casters.
• A custom hydraulic drum dumper can be made for your requirements, such as special lift height, extended reach, off-size containers, special straddle width, etc. Call 877-860-3620

Diameter Adaptors: Add the correct diameter adaptor for each smaller drum to handle multiple drum sizes with the same drum handler. Simply and quickly place into and remove from the drum holder. Adaptors for 17.5" diameter and smaller have adjustable hold down brackets for up to 38" tall drums.

Rim clamps and bracket assembly for plastic and fiber drums

Product Brochure

Explosion Proof and Stainless Steel Units Available

For more information please call 877-860-3620