All Lift FL-Series Foundationless Floor Mounted Jib Cranes

Model: FL25106

• Capacity: 250 lbs
• Hub: (Under clearance): 10 ft
• Span: 6 ft
• Beam Height: 6 in
• Flange width: 3-3/8 in
• Base Diameter: 26 in
• Unit Weight: 410 lbs (approx)

Note:

• Existing concrete must be a minimum of 6" thick reinforced with a minimum 3,000 psi (5 bag mix), soil pressure must support 2,500 psi
• Concrete in and around the area (6' x 6') of the base plate must be free of cracks and must appear in good condition
• All units have 26" BD and 22" BC 6 holes 1-1/4" diameter
• All foundations should be checked by a structural engineer
  

All Lift Cranes Floor Mounted Jib Cranes have a heavy wall structural steel pipe mast and a reinforced large diameter base plate for minimal deflection and continuous alignment. Durable and long lasting overhead floor cranes feature a rolled steel I-beam section with tapered flange for smooth trolley travel. Safety end stops at both ends of boom limit trolley travel. Floor cranes bolt to concrete foundations

Factory Drawing - Click to open